The Maze is a casual and compact version of the AB 2.0. Pressed in the same mold, it features everything you need for an enjoyable long-distance push.
The double drop brings the deck's standing platform close to the ground. This year, the slightly stiffer construction has been designed to provide maximum pumping potential while avoiding bottoming out. Its abrupt cut-outs and absence of kicktails noticeably reduce its weight to make this long distance pusher as portable as any other cruiser out there. The very same cut-outs are now home to newly designed wheel wells so you can fearlessly ride those big wheels you've been dying to go fast on!
Stiffness: 7 / 10
Push : 10 / 10
Cruise : 9 / 10
Weight : 3.34 lbs
The recommended weight for riding this board is equal to or below 250 lbs.
Bio sourced Greenpoxy laminates two sheets of pre-tensioned, pre-cured triaxial fibreglass to four plies of Hard Rock Canadian Maple and one central Poplar ply. Put together, you have a water resistant distance board,
It goes without mentioning that the fibreglass eternally protects the graphic from rocks, curbs, and worst of all, speed bumps. That’s right, the graphic’s there forever!
Simplicity enthralls; complexity gets lost in the cacophony.
Perfect for long treks. Comes with clear grip already applied. I put a Bennett Vector 5.0 on the front with 7° drop through wedged riser, and 1/8 axle spacers to prevent wheel bite with 85mm Seismic Speed Vents. I used Teflon tape on the axle threads to accomplish this. For the back truck I found that a Thunder 137mm with 1/8 inch drop through shock pad has the same ride height, works great, and is extremely light. With this setup you can curve, pump, bomb, and skog with no problem. I recommend custom bushings, and washers.